外置modem配置步骤

1.       Make sure the modem opened auto-answer function.

You can find there may be a LED light labeled AA on the modem, if it is off, you have to start it by command AT&S0=1 when serial connect to modem.

2.       Modify the /etc/pslaveconf/pslave.conf  of ACS.

Add the following commands to the end of pslave.conf. I test it at port 9.

s9.protocol ppp

s9.alias Modem

s9.authtype local

s9.socket_port 7008

s9.issue Welcome to Console Server Management Server %h port S%p \r\n\r\n

s9.break_sequence ~break

s9.speed 115200

s9.datasize 8

s9.stopbits 1

s9.parity none

s9.flow hard

s9.dcd 1

s9.ipno 192.168.160.101

s9.netmask 255.255.255.0

s9.initchat     TIMEOUT 10 \

                "" \d\l\dATZ \

                OK\r\n-ATZ-OK\r\n "" \

                TIMEOUT 10 \

                "" ATM0 \

                OK\r\n "" \

                TIMEOUT 3600 \

                RING "" \

                STATUS Incoming %p:I.HANDSHAKE \

                "" ATA \

                TIMEOUT 60 \

                CONNECT@ "" \

                STATUS Connected %p:I.HANDSHAKE

s9.pppopt       %i:%j novj \

                proxyarp modem asyncmap 000A0000 \

                noipx noccp login auth require-pap refuse-chap \

                mtu %t mru %t \

                ms-dns 0.0.0.0 ms-dns 0.0.0.0 \

                plugin /usr/lib/libpsr.so

s9.tty ttyS9

3.       runconf and saveconf then rebbot the ACS

4.       Dial to the ACS with username: root password: tslinux (the default). The client computer will get IP 192.168.160.101. And you can open the ACS web interface in the browser by ACS original IP.